Precautions for roller brush when rolling

2018-11-22 07:49:24

　　Xinhe Brush Industry has strong professional technology and is a brush company specializing in the production of roller brush products, with complete specifications, reasonable price and prompt delivery. The following are the precautions for the eagle roller brush during roll coating:

　　The viscosity of the coating used for roller coating should be adjusted according to the dryness and wetness of the surface of the substrate and the speed of water absorption. High viscosity, poor leveling, will affect the flatness of the film; while low viscosity, thin film, may increase the number of construction.

　　Daily construction according to the division, no quilting, so as not to repair afterwards, poor color or even "face". The roll coating on one plane is completed as often as possible to avoid leaving marks on the joint.

　　When the surface of the base layer is not flat, a narrow roller should be used. If bubbles appear in the roll coating, the coating may be slightly dried and then re-pressed with a roller with less slurry.

　　During the construction, the drum should be cleaned at the right time to keep the drum clean. After completion, thoroughly clean the drum and dry it for later use.

　　The products of letter and brush are won by quality, price and reputation. The products are divided into high, medium and low grades. The varieties are checked at the top of the product quality and exported to all over the world. They are favored by customers at home and abroad.